EVA hot melt adhesive
Performances and features:
1, Narrow M/W, narrow melting range, low viscosity and no yellowing.
2, Good anti-blocking, effectively reduce the viscosity of the colloid, control the opening time, improve product fluidity, hardness and softening point.
3, Good transparency, yellowing-resistant, and has good compatibility with EVA and petroleum resin.
Wax, as an important component of EVA environment-friendly hot melt adhesive, not only affects the basic indexes of EVA hot melt adhesive, such as the viscosity and softening point, but also has an important influence on the adhesion performance, curing speed, temperature resistance and other properties of hot melt adhesives.
|Nature of the Products||Chemical Composition||Appearance||Density g/cm3||Melting point ℃||Acid value mg KOH/g|
|PEW-0352W||FT wax||Small Bead||0.94-0.96||110±5||≤20|
|OSW-102||FT Wax||White Granule||0.94-0.96||100±5||≤20|
Wax emulsion for waterborne adhesive can improve adhesive property, heat sealability, opening time and low temperature resistance.
|Nature of the Products||Chemical Composition||Appearance||pH||Melting Point ℃||Solid content|
|LW102||Modified Paraffin Wax||Milk White Emulsion||6-8||52||45%|
|OE-6102||Oxidized polyethylene wax||off- white emulsion||7-9||115||36%|